The Stündenglass Gravity Infuser Classic and the Dr. Dabber Switch² both sit on a table, both push what you draw through water, and both cost serious money. Beyond that, they’re built on opposite ideas. The Gravity Infuser is a 360° rotating glass-and-aluminium piece with no battery, heater or circuit board: water and gravity do the work. The Switch² is an induction-heated electric rig with a temperature sensor, heating modes, an app and a rechargeable battery.
So this is a head-to-head between two very different machines, not a test of which one is “better” at the same job. We go round by round through how each works, heat and power, session style, cleaning, what’s in the box, warranty, and where to check price and stock. Every product figure comes from the manufacturers: Stündenglass’s own product pages and FAQs, and Dr. Dabber’s Switch² product page and Knowledge Base. We’ve checked our own listings against the same pages.
By the Summit Crew at jointventureshop.co.uk. For lawful adult use only (18+). Joint Venture does not sell any controlled substance.
The short version
- Stündenglass Gravity Infuser Classic: a non-electronic gravity infuser. Stündenglass lists it for mixology, culinary, hookah and aromatherapy use, and says it works with dry material, concentrates and hookah setups. You light material in its bowl, or connect another device through a 14mm male joint, and rotate the unit to fill and push out the top globe. 10-year warranty.
- Dr. Dabber Switch²: an electric concentrate rig that heats a 20mm quartz insert by induction, from 250–650°F, in 5–20 seconds. Up to 30 heating cycles per charge, USB-C pass-through charging, 2-year warranty.
- The real choice: no electronics and a gravity-hookah style session, or set temperatures, no open flame and push-button heating.
Head-to-head: the two products side by side
| Feature | Stündenglass Gravity Infuser Classic | Dr. Dabber Switch² |
|---|---|---|
| What it is | 360° rotating gravity infuser with built-in percolation | Induction-heated electric rig with a glass water attachment |
| How it works | Cascading water displacement, opposing airflow and gravity pull smoke into the top globe; rotating again pushes it out | Induction heats a 20mm quartz insert evenly from the sidewalls and base; a patented infrared sensor reads its temperature |
| Heat source | None built in: material is lit in the bowl, or another device is attached at the 14mm male joint | Built-in induction heater; Dr. Dabber says there are no atomisers to fail |
| Temperature control | None on the device | 250–650°F (about 121–343°C), 1° steps in the app; Descent, Ascent and Steady modes, plus Hill, Valley and Custom in the app |
| Power | None: no battery or charging | LiFePO4 battery cells; up to 30 heating cycles per charge; USB-C pass-through charging, 60–90 minutes for a full charge |
| Heat-up | Not applicable | 5–20 seconds depending on temperature setting |
| Delivery | Contactless delivery through a 45° adjustable mouthpiece, or direct draws through the included 3ft silicone hose | Draw through the glass attachment, filled with water just above the perc holes |
| Materials | Removable borosilicate glass globes; aircraft-grade anodized aluminum frame | Base unit with a glass attachment, quartz insert and carb cap |
| Cleaning | Water and isopropyl alcohol, or soap and water; rotate with alcohol inside for a quick clean | Swab the insert after each session; clean the glass with 91%+ isopropyl alcohol; no isopropyl alcohol on the outer shell |
| In the box | Anodized aluminum frame, borosilicate glass globes, silicone hose assembly, infusion chamber assembly, cleaning kit, sticker set, reusable craft box with handle | Switch² vaporizer, Drop heated loading tool, glass attachment, carb cap, USB-C charging cable, charging adapter |
| Size and weight | Stündenglass doesn’t publish these on its product pages | Height 9in, width 4in, weight 25.6oz (about 22.9cm, 10.2cm and 726g) |
| Warranty | 10 years (check Stündenglass’s terms) | 2 years on the battery, charger and electrical components |
| Price and stock at Joint Venture | See our Gravity Infuser Classic listing | See our Dr. Dabber Switch 2 listing |
What it is
Stündenglass Gravity Infuser Classic: 360° rotating gravity infuser with built-in percolation
Dr. Dabber Switch²: Induction-heated electric rig with a glass water attachment
How it works
Stündenglass Gravity Infuser Classic: Cascading water displacement, opposing airflow and gravity pull smoke into the top globe; rotating again pushes it out
Dr. Dabber Switch²: Induction heats a 20mm quartz insert evenly from the sidewalls and base; a patented infrared sensor reads its temperature
Heat source
Stündenglass Gravity Infuser Classic: None built in: material is lit in the bowl, or another device is attached at the 14mm male joint
Dr. Dabber Switch²: Built-in induction heater; Dr. Dabber says there are no atomisers to fail
Temperature control
Stündenglass Gravity Infuser Classic: None on the device
Dr. Dabber Switch²: 250–650°F (about 121–343°C), 1° steps in the app; Descent, Ascent and Steady modes, plus Hill, Valley and Custom in the app
Power
Stündenglass Gravity Infuser Classic: None: no battery or charging
Dr. Dabber Switch²: LiFePO4 battery cells; up to 30 heating cycles per charge; USB-C pass-through charging, 60–90 minutes for a full charge
Heat-up
Stündenglass Gravity Infuser Classic: Not applicable
Dr. Dabber Switch²: 5–20 seconds depending on temperature setting
Delivery
Stündenglass Gravity Infuser Classic: Contactless delivery through a 45° adjustable mouthpiece, or direct draws through the included 3ft silicone hose
Dr. Dabber Switch²: Draw through the glass attachment, filled with water just above the perc holes
Materials
Stündenglass Gravity Infuser Classic: Removable borosilicate glass globes; aircraft-grade anodized aluminum frame
Dr. Dabber Switch²: Base unit with a glass attachment, quartz insert and carb cap
Cleaning
Stündenglass Gravity Infuser Classic: Water and isopropyl alcohol, or soap and water; rotate with alcohol inside for a quick clean
Dr. Dabber Switch²: Swab the insert after each session; clean the glass with 91%+ isopropyl alcohol; no isopropyl alcohol on the outer shell
In the box
Stündenglass Gravity Infuser Classic: Anodized aluminum frame, borosilicate glass globes, silicone hose assembly, infusion chamber assembly, cleaning kit, sticker set, reusable craft box with handle
Dr. Dabber Switch²: Switch² vaporizer, Drop heated loading tool, glass attachment, carb cap, USB-C charging cable, charging adapter
Size and weight
Stündenglass Gravity Infuser Classic: Stündenglass doesn’t publish these on its product pages
Dr. Dabber Switch²: Height 9in, width 4in, weight 25.6oz (about 22.9cm, 10.2cm and 726g)
Warranty
Stündenglass Gravity Infuser Classic: 10 years (check Stündenglass’s terms)
Dr. Dabber Switch²: 2 years on the battery, charger and electrical components
Price and stock at Joint Venture
Stündenglass Gravity Infuser Classic: See our Gravity Infuser Classic listing
Dr. Dabber Switch²: See our Dr. Dabber Switch 2 listing
Sources: Stündenglass Gravity Infuser (EU store), Stündenglass Gravity Infuser (US store), Dr. Dabber Switch² product page and Dr. Dabber Switch² Knowledge Base.
Round 1: how each one works
Stündenglass Gravity Infuser Classic
Stündenglass calls the Gravity Infuser a “360° rotating glass infuser” that works through “cascading water displacement, opposing airflow technology and the natural force of gravity”. You fill the bottom globe with water, light material in the bowl and turn the unit over. As the water drains, smoke is pulled into the top globe through the built-in percolation; rotate it back and the smoke is pushed out through the mouthpiece. It is a patented design, and Stündenglass describes it as “a complete set that includes an aluminum bowl kit and a glass liner” that can also connect to any smoking or vaporisation device with a 14mm male joint.
Dr. Dabber Switch²
Dr. Dabber describes the Switch² as using omnidirectional induction heating, so its insert “heats up evenly from the sidewalls and the base at the same rate”. A patented integrated infrared sensor reads the insert temperature. The 20mm quartz insert comes already installed (a sapphire insert is sold separately), and because the heat goes into the insert, Dr. Dabber says there are no atomisers to fail.
Round 1 verdict: the Gravity Infuser is mechanical: water, gravity and your own heat source. The Switch² is a self-contained electric heater. Which is better depends on whether you want electronics at all.
Round 2: heat and power
The Gravity Infuser has no heater, no temperature control and nothing to charge. That means no battery to wear out, but also no way to set a temperature: heat comes from what you light in the bowl or from the device you connect at the 14mm joint.
The Switch² is all about controlled heat. Dr. Dabber lists a 250–650°F range (about 121–343°C), set in 1° steps in the app, a 5–20 second heat-up depending on the setting, and three dynamic heating modes on the product page (Descent, the default, plus Ascent and Steady). The app adds Hill, Valley and Custom. Power comes from LiFePO4 battery cells with over-voltage, over-current, under-voltage, over-temperature, short-circuit and reverse-polarity protection. Dr. Dabber quotes up to 30 heating cycles per charge, with USB-C pass-through charging and 60–90 minutes for a full charge. Its Knowledge Base adds that higher heat settings, longer hold times and brighter LEDs drain the battery faster.
Round 2 verdict: the Switch² wins on control and convenience; the Gravity Infuser wins if you want no battery or electronics at all.
Round 3: session style
A Gravity Infuser session is a ritual. Fill the bottom globe up to the top of the visible glass, rotate the unit almost all the way, light the bowl, and let the draining water draw smoke into the top globe. Then either draw from the unit or rotate again so the smoke is pushed out to you, which Stündenglass calls contactless consumption, through the 45° adjustable mouthpiece. The included 3ft silicone hose is there for direct draws. Stündenglass also describes cold-smoke finishing of food and drinks, with smoke pushed through the hose into a beverage cloche.
A Switch² session is push-button. Fill the glass attachment with water just above the perc holes, choose a temperature and heating mode, wait 5–20 seconds, load with the Drop heated loading tool and draw through the glass. Dr. Dabber recommends a cool-down of about 20 minutes after three or more consecutive heating cycles, as the top and back of the unit can get warm.
Round 3 verdict: the Gravity Infuser is a showpiece, social, hookah-style experience; the Switch² is quicker, repeatable and controlled.
Round 4: cleaning and care
From the Stündenglass FAQs:
- Clean only with water and isopropyl alcohol, or soap and water. Abrasive cloths and other cleaning agents can permanently damage the anodised and painted finishes, and alcohol can damage painted logos.
- Quick clean: empty the water, add ½–1 inch of isopropyl alcohol, refit the top globe, rotate until clean, then drain and rinse with clean water. Clean inside the valve via the magnetic bowl intake adapter end cap and rubber plug.
- If it gets hard to rotate, clean it straight away: build-up on the valve seals can make it stick and eventually tear them. A deep clean involves removing the globes, upstems and mouthpiece elbow.
- Don’t remove the bottom globe from the bottom side when it is full of water.
From the Switch² Knowledge Base:
- Swab the insert after every session, first with a dry cotton swab, then with one dipped in isopropyl alcohol while the insert is still warm. Never remove the insert while it is hot, and never torch it.
- Clean the glass attachment by shaking it with isopropyl alcohol (91% or higher recommended), rinse with warm water and air-dry fully.
- Remove the glass by resting both hands on the crown and pushing up gently from the bottom with your thumbs. Never pull it off by the mouthpiece.
- Do not use isopropyl alcohol on the outer shell.
Round 4 verdict: the Switch² needs a quick swab after every session; the Gravity Infuser needs regular valve and seal cleaning to keep it rotating smoothly. Neither is low-effort if you neglect it.
Round 5: in the box and warranty
Stündenglass Gravity Infuser Classic (Stündenglass’s list): anodized aluminum frame, borosilicate glass globes, silicone hose assembly, infusion chamber assembly, cleaning kit, sticker set and a reusable craft box with handle. Stündenglass backs it with a 10-year warranty; check its terms for the details.
Dr. Dabber Switch² (Dr. Dabber’s list): Switch² vaporizer, Drop heated loading tool, glass attachment, carb cap, USB-C charging cable and charging adapter. Dr. Dabber gives a 2-year warranty on the battery, charger and electrical components.
Round 5 verdict: the Gravity Infuser’s 10-year warranty is far longer. That’s partly because it has no battery or electronics to wear out.
Round 6: price and stock
Prices and stock change, so we don’t quote them here. Both were in stock when we wrote this guide; check our Stündenglass Gravity Infuser Classic and Dr. Dabber Switch 2 listings for the current price and availability before you order.
The verdict: which one is for you?
- Choose the Stündenglass Gravity Infuser Classic if you want a statement tabletop piece with no battery, charging or electronics, contactless gravity-hookah style sessions, the option to connect other 14mm devices, mixology and culinary smoke uses, and a 10-year warranty. Be ready to clean the valve seals regularly.
- Choose the Dr. Dabber Switch² if your focus is concentrates and you want set temperatures, no open flame, a 5–20 second heat-up, app-based heating modes and USB-C charging. Accept a battery, a shorter 2-year warranty and swabbing the insert after each session.
- Don’t treat them as substitutes. They do different jobs: one is a gravity water-filtration infuser, the other a temperature-controlled concentrate e-rig.
For lawful adult use only. Joint Venture does not sell any controlled substance. Always follow the manufacturer’s instructions for use, cleaning and storage.
Frequently asked questions
Is the Stündenglass Gravity Infuser a dab rig?
Not in the traditional sense. It has no banger, nail or heater. Stündenglass calls it a gravity infuser and says it works with dry material, concentrates and hookah setups, and that it can connect to any device with a 14mm male joint.
Does the Gravity Infuser need charging?
No. It has no battery or electronics; Stündenglass says it uses water displacement, opposing airflow and gravity.
How many heating cycles does the Switch² get per charge?
Dr. Dabber lists up to 30 heating cycles on a single charge, and says it can be used while charging thanks to USB-C pass-through charging.
Which has the longer warranty?
The Gravity Infuser: Stündenglass quotes 10 years. Dr. Dabber quotes 2 years for the Switch² battery, charger and electrical components.
How big is the Gravity Infuser?
Stündenglass doesn’t publish dimensions or weight on its product pages, so we haven’t listed any. The Switch² is 9in tall, 4in wide and 25.6oz according to Dr. Dabber.
Manufacturer sources
- Stündenglass: Gravity Infuser product page and FAQs (EU store)
- Stündenglass: Gravity Infuser product page and FAQs (US store)
- Dr. Dabber: Switch² product page
- Dr. Dabber: Switch² Knowledge Base
Check each Joint Venture listing for current price and stock before ordering.


